Keywords
How to Cite
Abstract
The aim of the present article is to present the design concept of a specialized device for mixing and applying adhesives (one and two-component ones) intended for unit production ar laboratory use. The paper presents the initial assumptions of the device design, such as the type of production, application method and adhesive properties. Technological requirements for the adhesive mixing and applying device were enumerated. The technological requirements will include the characteristics of the method of adhesive application. The construction requirements of the designed device are also presented. The design of this device has been presented in the form of a 3D model, made with use of the SolidEdge software. The advantages and limitations of the concept of the designed device were also presented.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/)
References
ABM catalogue (https:/Iamb.pl/, (retrieved on 9.03.2019)
Axentowicz M., Karpiński J.: Kleje jedno- i dwuskładnikowe produkcji Ciba-Geigy oferowane jako Araldit 2000 oraz Araldit 4000. [One and Two-Component Adhesives produced by Ciba-Geigy offered as Araldit 2000 and Araldit 4000]. Technologia i Automatyzacja Montażu 2 [Assembly Technology and Automation 2]. (1994) 43-46.
Board E.: Adhesive Technology and Formulations Hand Book. Retrieved from: https:/Idehatipustakbhandar.com (retrieved on 28.03.2019 r.)
Cagle C. V. (red.), Kleje i klejenie. Poradnik inżyniera i technika. [Adhesives and Bonding. A Guide for Engineers and Technicians]. PWE, Warszawa 1977.
Czaplicki J., Ćwikliński J., Godzimirski J., Konar P.: Klejenie tworzyw konstrukcyjnych [Construction Materials Bonding], WKiŁ, Warszawa 1987.
Ebnesajjad S.: Adhesives technology handbook. 2 nd edition. Inc. Norwich, William Andrew, NY, USA 2008.
Godzimirski J., Kozakiewicz J., Łunarski J., Zielecki w.: Konstrukcyjne połączenia klejowe elementów metalowych w budowie maszyn. [Constructional Adhesive Joints of the Metal Elements in Mechanical Engineering]. Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów 1997.
Kuczmaszewski J., Technologia śmigłowców, Teoria i technika klejenia. [Helicopters Technology. Bonding Theory and Technology].Wydawnictwo Uczelniane Politechniki Lubelskiej, Lublin 1990.
Łunarski J.: Połączenia klejone w procesach montażu. [Adhesive Joints in the Assembly Processes]. Techno¬logia i Automatyzacja Montażu 2 [Assembly Technology and Automation 2] (1994) 2-5.
Rudawska A.: Mieszanie, dozowanie i nakładanie kleju w montażu automatycznym. [Mixing, Dosing and Applying adhesives in Automated Assembly]. 11th International Conference .Automation I n Pro-duction Planning and Manufacturing", 03 - 05 May 2010, Żilina- Turcianskie Teplice, Slovak Republic, 208-213.
Rudawska A.: Oprzyrządowanie w technologii kle-jenia. [Instrumentation in the Bonding Technology]. Wydawnictwo Uczelniane Politechniki Lubelskiej, Lublin 2016.
Sarnow L.A.: Urządzenia do nakładania hermetyków, smarów i cyjanoakrylowych klejów. [Tools for Applying Locking Paints, Lubricants and Cyanoacry-lic Adhesives]. Technologia i Automatyzacja Montażu 1 [Assembly Technology and Automation 1] (1993) 34-36.
Sedliacik J., Mamiński M.: Gluing process' conditions Wydawnictwo SGGW, Warszawa 2015.